TRAINING MAGNETIC PARTICLE TESTING (NDT LEVEL II)

TRAINING MATERIAL OUTLINE MAGNETIC PARTICLE TESTING (NDT LEVEL II)

1. Principles of Magnets and Magnetic Fields
      + Theory of magnetic fields
      + Theory of magnetism
      + Terminology associated with magnetic particle testing
2. Characteristics of Magnetic Fields
      + Bar magnet
      + Ring magnet
3. Effect of Discontinuities of Materials
      + Surface cracks
      + Scratches
      + Subsurface defects
4. Magnetization by Means of Electric Current
      + Circular field
      + Longitudinal field
5. Selecting the Proper Method of Magnetization
      + Alloy, shape and condition of part
      + Type of magnetizing current
      + Direction of magnetic field
      + Sequence of operations
      + Value of flux density
6. Inspection Materials
      + Wet particles
      + Dry particles
7. Principles of Demagnetization
      + Residual magnetism
      + Reasons for requiring demagnetization
      + Longitudinal and circular residual fields
      + Basic principles of demagnetization
      + Retentivity and coercive force
      + Methods of demagnetization
8. Magnetic Particle Testing Equipment
      + Equipment selection considerations
      + Manual inspection equipment
      + Medium and heavy duty equipment
      + Stationary equipment
      + Mechanized inspection equipment
9. Types of Discontinuities Detected by Magnetic Particle Testing
      + Inclusions
      + Blowholes
      + Porosity
      + Flakes
      + Cracks
      + Pipes
      + Laminations
      + Laps
      + Forging bursts
      + Voids

1. Magnetic Particle Test Indications and Interpretations
   + Indications of nonmetallic inclusions
   + Indications of surface se
   + Indications of cracks
   + Indications of laminations
   + Indications of laps
   + Indications of bursts and flakes
   + Indications of porosity
   + Non-relevant indications
2. Magnetization by Means of Electric Current
   + Circular techniques
   + Longitudinal technique
3. Demagnetization Procedures
   + Need for demagnetization of parts
   + Current, frequency and field orientation
   + Heat factors and precautions
   + Need for collapsing flux fields
4. Equipment
   + Portable type
   + Stationary type
   + Automatic type
   + Liquids and powders
   + Black light type
   + Light sensitive instruments
5. Types of Discontinuities
   + In castings
   + In ingots
   + In wrought sections and parts
   + In welds INSTRUCTOR MAGNETIC PARTICLE TESTING (NDT LEVEL II) Y. Sinung Nugroho, Dipl.-Ing., MT.and Team Y.Sinung Nugroho, Dipl.-Ing., MT. is lecturer at aeronautical
   department politeknik negeri Bandung(before known as Poltek ITB). He
   was graduated from Science et Techniques Aeronautiques and Science et
   Techniques Aerospatiales University of Paris X, France. And graduated
   from ITB Master Degree on Aeronautical Engineering. He has followed
   some courses as informal education to improve his competencies, such
   as ASNT NDT Ultrasonic Testing as level III (Three), Magnetic Particle
   Testing as level III (Three), Liquid Penetrant Testing as level III
   (Three), ASNT NDT Ultrasonic Testing as level II (Two), ASNT NDT
   Magnetic Particle Testing as level II (Two), ASNT NDT Liquid Penetrant
   Testing as level II (Two), Aircraft General License A1 (Aircraft
   Structure), Aircraft General License A4 (Aircraft Turbine Engine),
   Human Resource Development training, Airbus 320 & N 250 Landing Gears
   Training, Messier – Dowty, France, Composite Material Course,
   Aerodynamic Short Course and etc. Mr. Sinung Nugroho also has worked
   in some institution or companies so he has real work experiences and
   these are valuable for him when delivering training. He has taught
   training classes for industrial training in Indonesia.

Jadwal Pelatihan Gemilang Training Tahun 2025

• 14-15 Januari 2021
• 11-12 Februari 2021
• 10-11 Maret 2021
• 14-15 April 2021
• 12-13 Mei 2021
• 9-10 Juni 2021
• 14-15 Juli 2021
• 11-12 Agustus 2021
• 8-9 September 2021
• 12-13 Oktober 2021
• 9-10 November 2021
• 8-9 Desember 2021

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta pelatihan.

Investasi dan Lokasi pelatihan:

Yogyakarta, Hotel 101 (6.000.000 IDR / participant * syarat & ketentuan berlaku)

Jakarta, Hotel Amaris Kemang (6.000.000 IDR / participant * syarat & ketentuan berlaku)

Bandung, Hotel Neo Dipatiukur (6.000.000 IDR / participant * syarat & ketentuan berlaku)

Bali, Hotel Ibis Kuta (6.000.000 IDR / participant * syarat & ketentuan berlaku)

Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant * syarat & ketentuan berlaku)

Lombok, Sentosa Resort (6.000.000 IDR / participant * syarat & ketentuan berlaku)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas :

Module / Handout

FREE Flashdisk

Sertifikat

FREE Bag or bagpackers (Tas Training)

Training Kit (Dokumentasi photo, Blocknote, ATK, etc)

2xCoffe Break & 1 Lunch, Dinner

FREE Souvenir Exclusive

Training room full AC and Multimedia